Filter
Top Products
2-5
W106 Rev 1.5
X20 Console Manual
Operating System
The operating system (Figure 2-1 on page 2-4) running on the X20
console is Microsoft Windows
®
XP PRO SP2 (Service Pack 2).
This allows for full software compatibility.
Status LED’s
The Status LED’s (Figure 2-1 on page 2-4) display the status of
the internal battery and external power supply. By displaying red,
orange or green colored LED's.
• Left Status LED- Indicates the status of the external power
supply
• Right Status LED- Indicates the status of the internal battery.
X20 Logo
When the X20 logo (Figure 2-1 on page 2-4) is pressed for 5
seconds, while the X20 console is running, the X20 Manager
window will be displayed. Your X20 logo may be different. This
will allow the operator to:
• Adjust the screen brightness
• Adjust the volume control of internal or external speakers
• Check the status of the external power supply
• Check the status of the internal battery
• Change the auto-shutdown delay and enable auto-shutdown
• Check the status of the Topcon logo and test the audio volume
• Allow the X20 console to be shutdown from this window.