Filter
Top Products
5-7
W106 Rev 1.5
X20 Console Manual
X20 Power Management Status LED’s
Figure 5-2 on page 5-8 shows the various states of the Status LED’s, as
displayed on the bottom right hand-side of the X20 console.
The Status LED’s will be displayed after the Power button is pressed
for 3 seconds or while the X20 console is running.
If the Power button is pressed and does not switch ON, then the Status
LED’s will flash for 10 seconds, the different reasons for this are
explained adjacent to Figure 5-2 on page 5-8.