Filter
Top Products
4-6
www.topconpa.com
X20 Console Manual
Connecting the Power Connector
Once the X20 console has been installed in the vehicle and the X20
Power Harness has been fitted to the battery terminals:
Connect the Power Connector to the Bayonet Power plug on 1.
the back of the X20 console (Figure 4-3 on page 4-6)
Line up the ‘notch’ (Figure 4-3 on page 4-6) on the 2.
Power Connector (on the X20 Power Harness) with the notch
which is situated at twelve o’clock on the Bayonet Power plug
(Figure 4-3 on page 4-6) on the X20 console
Push the Power Connector ON holding the outer sleeve 3.
(Figure 4-3 on page 4-6)
Once fully home, turn the outer sleeve clockwise until a 4.
‘click’ is felt.
The Power Connector is now connected.
Power Connector
on A2400 ‘X20 Power Harness’
Notch
Bayonet Connector
on back of X20 Console
Outer Sleeve
Figure 4-3. Connecting the Power Connector