Filter
Top Products
4-3
W106 Rev 1.5
X20 Console Manual
Option 2: Mounting the X20 Console Using the
RAM
®
Rail Mount
• The RAM
®
Rail Mount provided fits rails between 3/4” to 1” in
diameter.
Wrap the correct length of rubber strip around the rail 1.
where the base will be attached
Assemble the 1.5” RAM® Base with the RAM® Rail 2.
Mount using the 3 screws and nuts provided.
How to Use the RAM
®
Mounts
The RAM1.
®
Mounts are loosened by unscrewing the knob in
an anti-clockwise direction.
Once loosened, place the RAM2.
®
mount onto the RAM
®
Base
on the X20 console, then place the other end of the RAM
®
Mount on the RAM
®
Base attached to the vehicle
Once the RAM3.
®
Mount is on both RAM
®
Bases then loosely
turn the knob in a clockwise direction
Tighten the knob just enough so the X20 console can be 4.
positioned and angled correctly to suit the operator
Once the X20 console is in the desired position then tighten 5.
the knob up so the X20 console is held in position securely.
TIP
It may be necessary to drill a 5/32” hole through
the RAM
®
Rail Mount Kit and rail using the screw
provided in the kit.
This will prevent the the RAM® Base from slipping.
TIP