Filter
Top Products
12-1
W106 Rev 1.5
X20 Console Manual
Transferring Data
USB Ports
There is a USB Thumbdrive supplied with the X20 console kit.
There are 4 USB ports on the X20 console, 2 on the left side of the
console (Figure 2-2 on page 2-6) and 2 at the rear (Figure 2-3 on page
2-7). The USB Thumbdrive can be plugged into any one of the 4 USB
ports on the X20 console.
The USB Thumbdrive is used for software upgrades for the X20
console, and for transferring data to between the X20 console and other
PC's.
USB Thumbdrives are very rugged and do not have multiple fine pins
as with PCMCIA or Compact Flash Cards. USB Thumbdrives are also
HOT pluggable which means they can be carefully plugged in and
removed at any time whilst the X20 console is running.
TIP
Software supplied on the CD for the Thumbdrive must
be loaded on any other PC before the Thumbdrive will
operate on that PC.
TIP
TIP
If the PC is running Windows
®
XP then there is no need
to load drivers as Windows
®
XP automatically detects
and loads the USB Thumbdrive.
TIP