Filter
Top Products
10-1
W106 Rev 1.5
X20 Console Manual
Switching the X20
Console OFF
The ATX Shutdown Process
Close all applications that are running, 1. save any data if
prompted.
The 2. Windows Desktop will be displayed.
Press the 3. Power button for 3 seconds. Both status LED’s will
flash to indicate that the shutdown is in progress.
X20’s Power Management will start the full ATX Shutdown, 4.
then Windows
®
will start shutting down and save all settings
The X20 console will automatically switch OFF.5.
TIP
This is the preferred way of shutting down the X20
console.
TIP
WARNING
Holding down the Power button for 10 seconds
will cause an immediate shutdown and no data
will be saved. This function is not recommended
and should only be used if absolutely necessary.
WARNING