Filter
Top Products
8-6
www.topconpa.com
X20 Console Manual
Procedure of Auto-shutdown
When the regulator battery voltage drops below 10.6 Volts:
The Status LED for external supply (left LED) will turn 1.
RED
The 2. X20 Manager window will be displayed. No matter
what programs are running
The regulator voltage displayed will be below 10.6 Volts 3.
and ‘POWER FAILED’ will be displayed in RED, in the
X20 Manager window
An audio 4. beep will be sounded (if audio volume is turned
ON)
At the end of the Auto-Shutdown delay period (default 10 5.
seconds); both Status LED's will start flashing indicating
the X20 console is shutting down, both LED's will continue
to flash while the shutdown is being performed
Windows6.
®
will start shutting down all ATX compliant
programs and save data, then Windows
®
operating system
will start shutting down and will save all data and then the
X20 console will turn OFF.