Filter
Top Products
5-3
W106 Rev 1.5
X20 Console Manual
Conditions in which the X20 Console Will NOT
Start
If the X20 Power button is pressed for 3 seconds, and the X20 console
will not startup the two Status LED’s will flash for 10 seconds.
If either one of the Status LED’s is displaying a RED color; the X20
Power Management system will not allow the X20 console to startup.
If one of the Status LED's is displaying a RED color, the two LED's
will flash for 10 seconds.
TIP
The Power button only requires light contact to
instruct the Power Management system to start the
X20 console. It needs to be held for 3 seconds to
enable the start sequence.
The Power button is not a power switch.
TIP