Filter
Top Products
2-8
www.topconpa.com
X20 Console Manual
Power Button
The Power button (Figure 2-3 on page 2-7) has to be pressed for 3
seconds to start the X20 console up.
The X20 will not start unless there is a satisfactory external power
supply and the internal battery has sufficient charge, see Chapter 5.
Reset Button
The Reset button (Figure 2-3 on page 2-7) allows the X20 to be
reset in the event the X20 console could not be shutdown normally.
Power Connector
The Bayonet Power Connector (Figure 2-3 on page 2-7) is where
the X20 Power Harness connects to the X20 console providing
10.8-18.0 Volt supply.
RAM
®
Mount
The RAM
®
Mount (Figure 2-3 on page 2-7) provides an adjustable
ball type, which allows for optimum positioning.
Heat Sink Fins
The external Heat Sink Fins (Figure 2-3 on page 2-7) exchange the
heat from inside the console to the outside environment, therefore
keeping the console within operating temperature, without the use
of fans.
WARNING
Pressing the Reset button should be avoided, as
no data is saved and Windows® does not do an
orderly shutdown when ‘Reset’ is performed.
WARNING