eyon
e
as cs
2.59
13.
Press
COMMUNICATION OPTIONS
,
ENTER
.
The display will show:
Delayed
Enter Time: 15/17:05
14.
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
Note: If you make a mistake or you want to change just one character in
the number, press
to move the cursor leftward, or to move
it rightward, to that character. Then re-enter until the number is
just as you want it.
15.
Press
START
.
If, in step 12, you chose an immediate transmission, your fax machine will begin
dialing. If you chose a delayed command, the machine will display “Reserved” on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
F-Code database polling
1.
Press
COPY
/
FA X
to change to Fax mode, if necessary.
2.
Press
COMMUNICATION OPTIONS
eight times.
8.F-Code Polling
Comm.Option/Enter
3.
Press
ENTER
.
Enter Sub-Address
_
4.
Use the numeric keypad to enter the appropriate subaddress number. In
this example, we’ve entered
123456.
Enter Sub-Address
123456_
5.
Press
ENTER
. The display will show:
Enter Password
_
6.
Use the numeric keypad to enter the appropriate password number. In this
example, we’ve entered
654321.
Enter password
654321_
Note: If you know that this sub-address does
not
have a password, skip
to step 8.
7.
Press
ENTER
. The display will show:
Enter Fax Number
_
8.
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START
.
9.
What you do now depends upon when you wish the transmission to begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
10.
Press
COMMUNICATION OPTIONS
,
ENTER
.
The display will show:
Delayed
Enter Time: 15/17:05
11.
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
Note: If you make a mistake or want to change just one character in the
number, press
to move the cursor leftward, or to move it
rightward, to that character. Then re-enter until the number is just
as you want it.
12.
Press
START
.
If, in step 9, you chose an immediate transmission, your fax machine will begin
dialing. If you chose a delayed command, the machine will display “Reserved” on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
