Getting started
1.25
At the end of the operation, your fax machine beeps and displays:
972-555-2009
** Complete **
Important: Whenever you transmit, whether this way or in the numerous ways
we’ll describe throughout this manual, what actually appears on the
top line of the display will depend upon how the remote fax number is
set. The line may even be blank.
Note: What if the call fails for some reason? See pages 1.27–1.28.
Sending using the
FBS
1.
If the machine is already in Fax mode, skip to step 2.
If the machine is in Copy mode, press
COPY
/
FA X
to change to Fax mode.
2.
If there isn’t a document in the feeder, skip to step 3.
If there’s a document in the feeder, remove it.
3.
Open the book cover.
4.
Place the document face down on the
FBS
and align it with the document
scale on the right, then gently close the book cover.
Make sure the document is set beyond the right front corner.
CAUTION
!
:
Gently
close the book-cover so that you don’t catch
your hands, possibly injuring them.
When a thick document, such as a book, is on the
FBS
,
do not press strongly from the top of the book-cover.
This may break the
contact glass
and cause an injury.
5.
Press
BOOK DOC SIZE
to select the document size, letter (displayed as
Ltr
),
legal (
Legl
), half-letter (
HLtr)
or
B
4. (Half-letter is 8.5″ wide × 5.5″ tall;
B
4, widely used internationally, is 10.1″ × 17.0″.)
B4
HLtr
Legl
Enter Scan Size
Ltr
6.
Adjust resolution and contrast if necessary.
If these are
OK
, skip to step 7. Otherwise, as desired:
Press
RESOLUTION
to change the resolution.
Press
CONTRAST
, then press or to change the contrast.
7.
Now, enter the fax number.
(In fax terms, you’re calling the
remote fax
, on its
remote fax number
.)
Use the numeric keypad to enter the number:
Press Start
919725552009_
As you can see, you also enter any access codes (such as a
9
for “dialing
out” from an office telephone system, or
1
for long-distance) along with the
number, just as you would for a regular phone call.
. . . or . . .
Press a one-touch key to dial the number. (See page 2.9)
. . . or . . .
Press
SPEED DIAL
/
TEL INDEX
once, followed by a three-digit speed dial
number, to dial the number. (See page 2.12)
. . . or . . .
Press
SPEED DIAL
/
TEL INDEX
twice and search for the name to dial the
number. (See page 2.16)
