eyon
e
as cs
2.70
Erasing a programmable one-touch key
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
/
FA X
to change to Fax mode.
2.
Change to the Fax mode then press
PROGRAM
,
C
,
2
,
ENTER
. The display
shows something like:
Select Program No.
73:Delayed
If
73
is the key you want to erase, skip to step 3. (However, our examples
from here will say
“74”
rather than
“73.”
)
3.
Press the programmable one-touch key you want to erase. Here, we’ve
selected
74
:
Select Program No.
74:Polling
4.
If you change your mind and wish to erase a different programmable one-
touch key, just press that key before going on step 5.
5.
Press
ENTER
. The display shows:
Erase P One-Touch
Check Program/Enter
Important:
If you want to quit without erasing the programmable one-
touch key you’ve selected, press
PROGRAM
. The fax will
return to step 3.
6.
Press
ENTER
to erase the number.
Erase P One-Touch
** Complete **
To erase another programmable one-touch key, repeat steps 3–5.
Or press
STOP
to return to standby mode.
Printing a list of your programmable
one-touch keys
Your fax machine can print a list of the commands you’ve stored in your
programmable one-touch keys. The list includes each key’s one-touch letter, the
telephone number, when the command should start, which command you’ve
selected and — if applicable — the selected call group(s), SecureMail mailbox(es)
or database file(s) you’ve stored in the key.
To print the list, change to the Fax mode then press
PROGRAM
,
C
,
3
,
ENTER
.
