Getting started
1.18
EasyStart
Your Muratec fax machine comes with
EasyStart
. It guides you in entering the basic
settings required for normal operation — so it’s
easy
for you to
start
using your
machine quickly. (Of course, you can make other settings later or change these
settings. We’ll explain in “Beyond the basics,” beginning on page 2.1.)
Clearing settings before beginning
Before using EasyStart, clear your machine’s built-in
user data memory
, which
stores settings. This insures the memory will hold only your settings.
Important:
After you use EasyStart, please
do not
clear the memory again
unless
an authorized technician asks you to do so.
To clear the machine’s memory:
1.
Press
COPY
/
FAX
to change the Fax mode. Then press
PROGRAM
, *,
2
.
The display now asks whether you’re sure about clearing the memory:
Clear User Settings
Check Program/Enter
Note:
If you don’t want to proceed, just press
PROGRAM
.
2.
If you are sure, press
ENTER
to complete the process by clearing the
existing user data memory settings.
What do you want to do?
EasyStart will want you to enter a little information; so, first, please determine the
following before you proceed:
•
The type of dialing
your telephone system requires — You may select either
tone
or
pulse
(rotary) dialing.
•
The name and fax number you wish to appear on your faxes
— Every fax
page you send will arrive at the receiving machine with a single line of text at the
very top of the page. Among other things, this text will list a
name
and a
fax
number
. The name must not be longer than 22
characters
.
Note:
Incidentally, the fax industry term for this text is
Transmit Terminal
Identifier
(
TTI
). (Another term,
Subscriber
ID
, refers to just the fax
number in the
TTI
.)
Using EasyStart to enter initial settings
Important:
Be sure your fax machine has paper before you begin EasyStart, since
this feature can print a handy settings list at the conclusion.
Important:
If you press
STOP
during EasyStart, your fax machine will return to
standby mode (its normal condition) but will retain what settings you
saved by pressing
ENTER
as described in these instructions.
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
/
FA X
to change to Fax mode.
2.
Press
PROGRAM
,
I
(the letter “
I
,”
not
the number “1”)
,
ENTER
.
The display will show the current setting of the fax’s built-in
calendar/clock, with a cursor appearing under the first digit.
Enter Time
’01 01/01 00:00
3.
Use the numeric keypad to enter the correct date and time, using a
YYMMDD
format for the date and
24-hour
format for the time. For instance, if it’s
8:30
PM
on March 10, 1998, press
9803102030
, which results in:
Enter Time
’98 03/10 20:30
Note:
Your fax machine automatically inserts the spaces and date-slash.
All you have to do is enter the digits.
To change only one digit, press
to move the cursor leftward, or to
move it rightward, to that digit. Then, enter the correct digit.
4.
Press
ENTER
to save the clock setting and continue EasyStart.
