Getting started
1.15
3.
Check the front
corners of the paper
stack and make sure
they are below the
tabs.
4.
Push the paper cassette back into its original (closed) position. You’ll feel a
click when it’s properly in place.
5.
Attach the paper size sticker on the cassette’s front.
The paper level indicator on the front
paper cassette lets you see how much
paper is in the cassette without your
having to open the cassette. When you
see the paper level indicator drop (
i. e.,
show more dark area), make sure you
have a supply of paper nearby. Then,
when you see the “Please Supply
Paper” message on the display, you’ll
be ready to refill the cassette.
Important: To avoid paper jams,
do not
refill this tray
without
first removing
all
of any paper which may remain in it. In other words,
do not
just
add
sheets to an already-loaded stack.
Loading the multipurpose tray for copying
You may use letter-, legal- and half-letter sized paper in the
multipurpose tray
,
which the machine uses for
only
copying, not for faxing.
Important: If loading transparency (OHP) film into the multipurpose tray, be sure
that the sheet is designed for
laser printers
and
not
for copiers. Also,
be sure that the film
does not
have a paper backing and/or a leading
strip. If it does, remove the paper backing and/or strip before
inserting. Only film should go in, not film with any backing or strip.
1.
Adjust the multipurpose tray for the width of paper you plan to load, by
sliding the guide to the slot for the paper size you’ll be loading.
2.
Insert a sheet into the
multipurpose tray until
it won’t go in any
farther.
Note: The multi-
purpose tray
can hold only
one sheet of
paper at a
time.
Paper level
indicator
