Filter
Top Products
16-EN
Setting the sports team announcement type
The following operation sets the announcement type for a stored sports
team.
Setting item: Game Alert
1
Touch [ ] or [ ] of the Game Alert to select ON.
The received announcement for all stored sports teams is set.
If OFF is set, no announcements will be made.
2
Touch [ ] of Game Alert.
The display changes to the Game Alert Setup screen.
3
Touch [ ] of the favorite league.
The display changes to the team list of the selected league.
4
Touch the favorite team.
The selection key ([ ], [ ]) is displayed.
5
Touch [ ] or [ ] of the desired announcement type.
• Select “NONE” on the list and touch [OK?] if you do not want to
store in memory. ALERT interruption does not occur.
“USB Setup” is selected on the Source setup main menu in step 3.
iPod Search Mode Setting
The unit allows you to search for the iPhone/iPod using eight different
search modes.
When the search mode is in Playlists/Artists/Albums/Podcasts/
Audiobooks, the initial setting is ON, and when the search mode is in
Genres/Composers/Songs, the initial setting is OFF.
• This setting item displays only when the optional iPhone/iPod is
connected.
• Set at least one Search Mode to ON, and all the modes should not be
set to OFF at the same time.
• For search mode details, refer to “Searching for a desired Song”
(page 53).
Skip Style Setting
The unit is provided with a page skip/percent skip/alphabet skip
function for effective searching. When you use this function in the
search mode, you can quickly search an artist or a song, etc.
• For Skip Style function details, refer to “Page Skip Function/Percent
Skip Function/Alphabet Skip Function” (page 57).
• This setting is effective to the search mode of USB memory, Portable
audio player and iPhone/iPod.
Display Setup Operation
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of Display Setup.
The DISPLAY SETUP screen appears.
3
Touch [ ], [ ] or [ ] etc., of the desired item to
change its setting.
Setting items:
Visual EQ*
1
/ Dimmer / Dimmer Low Level / Background /
Auto Background / Data Download*
2
/ Screen Alignment /
Display
*
1
Refer to “Visual EQ” on page 23.
*
2
Refer to “Downloading the Background data” on page 24.
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
INITIAL: Announces when a game starts.
SCORE: At the beginning of the game, the announcement
interrupts; announces every time the score changes.
USB Setup
ON / OFF
PAGE / ALPHABET / PERCENT
Display Setup
To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the Display mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Display mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.