Filter
Top Products
47-EN
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Display example for XM main screen
: Displays the preset number*/channel number
Touching this area will display the list screen of preset stations.
Touch the Information area in the XM or SIRIUS mode.
Each time you touch this area, the display changes as shown
below.
In XM mode:
*
1
If all of Auxiliary Data Field Characters cannot be displayed, touch
the Information area to display the other characters.
In SIRIUS mode:
*
2
Displayed when there is a composer name (text information).
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 digits number. It is printed on a label found on the
SAT Receiver.
It can also be displayed on the screen of the iXA-W407 in the following
way.
1
While receiving SAT Radio, touch NO. [ ] or [ ] to
select channel “0” for XM and channel “0” or “255”
for SIRIUS.
The unit displays the ID number.
2
To cancel the ID number display, change the
channel.
• You cannot use “O”, “S”, “ I” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing Channel Presets
1
After selecting a desired band, touch area to
display the preset channel list.
2
Touch and hold any one of the preset stations
(1 through 6) for at least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or
SIRIUS-1, SIRIUS-2 and SIRIUS-3 ).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving Stored Channels
1
After selecting a desired band, touch area to
display the preset channel list.
2
Touch any one of the preset stations (1 through 6)
that has your desired satellite channel in memory.
The information
display
changes when
the area is
touched while
displayed.