Filter
Top Products
19-EN
Setting item: Beep
Setting contents: OFF / ON
Scroll display is available if folder name, file name or tag information is
entered.
Setting item: Auto Scroll
Setting contents: OFF / ON
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPhone/iPod is
connected.
Seven types of font can be selected.
Setting item: Language Select
Setting contents: CHI / JPN / ARA / THA / W-EU / RUS1 / RUS2
• When “CHI (Chinese)” is selected from “Language Select”, Chinese
font (GB2312) is used and displayed. If you select other than “CHI
(Chinese)”, another font is used.
A Unicode file can be displayed regardless of the setting (excluding
Chinese). However, a 1-byte character code file may not display
accurately. Please set according to the target language.
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED Dimmer Level
Setting level: -2 to +2
System Setup Operation
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of System Setup.
The SYSTEM SETUP screen appears.
3
Touch [ ], [ ] or [ ] etc., of the desired item to
change its setting.
Setting items:
IN Int. Mute*
1
/ IN Int. Icon / Remote Sensor*
2
/ Camera IN /
NAV. IN / NAV. Mix*
3
/ AUX1 IN / AUX2 IN / AUX OUT /
Bluetooth IN / USB Adapter / Option Key
*
1
Displayed only when Bluetooth IN is OFF.
*
2
When ON is set in “Setting the Picture Output” (page 21), the item is
displayed.
*
3
When ON is set in “Setting the Navigation Mode” (page 20), the item
is displayed.
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Sound (Beep) Guide Function
OFF: Deactivates the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
ON: Activates the Sound Guide mode.
Setting the Scroll
OFF: Turns off the AUTO scroll mode. Scroll display is done
once as a track is changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
Setting the Language
CHI: Chinese Font Display
JPN: Japanese Font Display
ARA: Arabic Font Display
THA: Thai Font Display
W-EU:Normal Font Display (ISO8859-1)
RUS1:Russian Font Display (WINDOWS-1251)
RUS2:European Font Display (WINDOWS-1252)
Adjusting the Dimmer of Button Lighting at
Night
System Setup
To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the System mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of System Setup. Refer to each section for details.