Filter
Top Products
23-EN
Visual EQ Setting Operation
1
After steps 1 and 2 in “Display Setup Operation”
(page 16) have been performed, touch [ ] of Visual
EQ.
Visual EQ screen appears.
2
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
BK RICH / Visual EQ / Bright / Color / Tint / Contrast / Sharp /
User Memory
• The items can be changed by touching [ ]/[ ].
3
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc. through the screen shown.
This function allows the Black Richness Level (deeper blacks) of a dark
scene to be adjusted.
Setting item: BK RICH
Setting contents: OFF / 1 / 2 / 3 / 4 / 5
You can adjust the level of picture adjustment effectiveness
between 1 and 5. (The darkness increases gradually from level
1 to 5.)
You can select a mode suitable for the subject image.
Setting item: Visual EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Setting item: Bright
Setting content: -15 ~ +15
You can adjust the brightness between –15 and +15.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as AUTO is set in
“Setting the Brightness of the Backlighting”
(page 17).
Setting item: Color
Setting content: -15 ~ +15
You can adjust the color between –15 and +15.
• When a Navigation system with the RGB feature is connected,
although the setting can be operated, the color of picture will not
change.
Visual EQ
The following steps 1 to 3 are common operations to each
“Setting item” of Visual EQ setting. Refer to each section for
details.
Black Richness Function (BK RICH)
Selecting the Visual EQ Mode
(Factory setting)
OFF (FLAT): Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1: Recalls the Visual EQ mode being stored on
preset No.P-1 from
“Storing Visual EQ” (page 24).
P-2: Recalls the Visual EQ mode being saved on
preset No.P-2 from
“Storing Visual EQ” (page 24).
Adjusting Brightness
Adjusting Color of Picture