Filter
Top Products
31-EN
01GB06PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From a PC
Customizing EUPHONY
You can customize the sense of ambience (localization and ambience)
of the cabin sound field and the balance (Level) between surround
channels and save the settings.
1
Click [Custom] for “EUPHONY.”
The EUPHONY custom screen is displayed.
2
Click [Standard], [Wide], or [Off] in the “Localization/
Ambience” to choose the localization/ambience.
Standard: Setup of the regular ambience of Ls/Rs sound.
Choose this for a subtle expansion in sound.
Wide: The ambience of Ls/Rs sound is more easily
recognizable. Use this when you want brightness
and crispness.
OFF: This disables EUPHONY.
3
Adjust the localization/ambience for each channel.
Drag [ ] for “Localization/Ambience” or click [ ]
or [ ].
Setting channel: C (Center), L (Left Front) / R (Right Front),
Ls (Left Surround) /Rs (Right Surround)
Setting contents: 0.0 to 1.0 (in 0.05 steps)
4
Click either [ ] or [ ] for “L/R Group.”
: Both R and L channels are set at the same value.
: Channels R and L can be set independently.
• When you select “ ,” a message to confirm which of the R or L
channel set up values is to be applied will be displayed. Click either
[LEFT] or [RIGHT].
5
Adjust the level for each channel. Drag [ ] for
“EUPHONY Output Level” or click [ ] or [ ].
Setting channel: C (Center), L (Left Front) / R (Right Front),
Ls (Left Surround) /Rs (Right Surround)
Setting contents: -12 to 0 dB (in 0.05 steps)
6
Click [Store] for “Custom Memory” to save the
settings.
The Memory selection screen is displayed.
7
Click either [Custom 1], [Custom 2], or [Custom 3]
and click [OK].
8
When setting is complete, click [Close Window].
• This setting is only available for 2-channel signal playback.
• If you click [Call] in Step 6, you can call and readjust the stored
setting values. Click either [Custom 1], [Custom 2], or [Custom 3] in
the setting value selection screen and click [OK].
• By clicking of “Mute” while in the adjustment mode, you can
mute the selected channel.
Pro Logic processing can be applied to the music signals recorded in 2-
channel stereo. This gives normal 2-channel stereo a more live, concert
hall effect. When you select “Music,” you can adjust the center width.
This function provides the optimum vocal localization by adjusting the
center channel localization in between the center speaker and the L/R
speakers. (Initial setting: “Music”)
1
Click [ ] for “2ch Playback Mode” and select and
click [Dolby Pro Logic II] from the pull-down menu.
2
Click either [Music] or [Movie] for “Dolby Pro Logic
II.”
Music: Suits stereo TV shows and all programs encoded in
Dolby Surround. Creates a sound field directivity
near that of discrete 5.1-channel sound.
Movie: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
• For details on Dolby Pro Logic II, see page 61.
• This function only works with 2-channel signals.
Using Dolby Pro Logic II (Dolby Pro Logic
II)
01GB00PXAH800.book Page 31 Tuesday, February 8, 2011 9:04 PM