Filter
Top Products
41-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
7
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Naming the AUX Input (AUX Name)
When you connect an external input product, you can assign it a name
of your choice. After setting the value to ON in “Setting the AUX Input
(AUX IN)” (page 39), “Setting the Digital Input (Digital AUX)”
(page 40), set this item (Initial setting: “Auxiliary”).
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Input Setup,”
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “AUX Name,”
and then press the [Rotary encoder].
The AUX selection screen is displayed.
4
Select the AUX you want to set by rotating the
[Rotary encoder], and press the [Rotary encoder].
Settings item: AUX 1/AUX 2/AUX 3/Ai-NET(HU)/Ai-
NET(CHG)/Digital 1/Digital 2
• The number of AUX varies depending on the AUX Input Setup
(page 39).
5
Select from “Auxiliary,” “TV,” “EXT.DVD,” “Portable,”
and “Game” by rotating the [Rotary encoder], and
press the [Rotary encoder].
6
To set another AUX, press [ ] and repeat Steps 4
and 5.
7
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit, and you cannot set them on the
unit itself.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Mixing Navi Audio Guidance (Navi Mix
Setup)
When a navigation system is connected, its voice guidance will be
mixed with the system and output from the front speakers (Initial
setting: “OFF”). You can adjust the navigation guidance volume. (Initial
setting: “0 dB”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Input Setup,”
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Navi Mix
Setup,” and then press the [Rotary encoder].
The NAVI MIX SETUP screen is displayed.
4
Rotate the [Rotary encoder] to select “ON” or “OFF,”
and then press the [Rotary encoder].
OFF: No mixing of the navigation voice guidance.
ON: Navigation voice guidance is mixed.
• If you select [ON], set the setting value.
5
Press [ ] for at least 2 seconds to go back to the
normal mode, and repeatedly press the [Rotary
encoder].
The NAVI LEVEL adjustment screen will be displayed.
6
Rotate the [Rotary encoder] to make adjustment.
Setting contents: -10 to +10 dB
7
When the setting is complete, press [ ].
• If [ ] is pressed during setting, the unit returns to the previous
item.
• For the connection of a navigation system, refer to the installation
manual.
01GB00PXAH800.book Page 41 Tuesday, February 8, 2011 9:04 PM