Filter
Top Products
45-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
6
Press [ ] twice to go back to the screen for Step 3.
7
Rotate the [Rotary encoder] to select “Level
Adjustment,” and then press the [Rotary encoder].
8
Select the source for the head unit by rotating the
[Rotary encoder], and press the [Rotary encoder].
CD/Compressed Data/FM/Digital Radio/DVD/AUX/Others
9
Select the level you want by rotating the [Rotary
encoder], and press the [Rotary encoder].
MX Plus level increases in the following order: 1 2 3.
FM (Level 1 to 3, OFF):
The medium to high frequencies become clearer, and produces well
balanced sound at all frequencies.
CD (Level 1 to 3, OFF):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a more
clear, clean output.
Compressed Data/Digital Radio (Level 1 to 3, OFF):
This corrects information that was lost at the time of compression.
This reproduces a well-balanced sound close to the original.
DVD (Cinema, Action, Music, OFF):
Cinema:
Movie dialogue is clearly reproduced. Action movies are
reproduced with more powerful sound.
Action:
Action movies are reproduced with more powerful sound.
Music:
Lower register sounds (drums, bass, etc.) and vocals are
emphasized for clean and clear output.
AUX / Others (Compressed, Music, DVD, OFF):
MX mode suitable for the media (Compressed Data, Music,
DVD) can be selected.
10
To adjust another source, press [ ] and repeat
Steps 8 through 9.
• You can listen with Defeat OFF (adjusted setup values) or with
Defeat ON (Initial value) to compare, by following the steps below.
1 Press and hold the [Rotary Encoder] for 2 seconds or
longer while in the adjustment mode.
2 Rotate the [Rotary Encoder] to switch on/off Defeat, and
listen to compare.
3 To exit, select “OFF” and then press [ ].
11
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• To enable this function, Defeat should be is set to ON.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Setting the MX Plus (Standalone Mode)
MX (Media Xpander) Plus enhances the vocal and instrumental sounds
for music sources such as radio/CD/MP3, by generating harmonics lost
during digital processing. This high frequency compensation adds
clarity and detail normally lost to road noise.
In the Standalone mode, MX Plus does not become linked with the
source of the head unit. MX Plus should be set for each external input.
MX Plus mode will be switched, linked with the source switching of
PXA-H800.
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “MX Plus,” and
then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “MX Plus
Setup,” and then press the [Rotary encoder].
4
Rotate the [Rotary encoder] to select “ON,” and then
press the [Rotary encoder].
When you select [OFF], MX Plus for all music sources
becomes disabled.
If an Ai-NET compatible head unit is connected, go to
Step 5.
If an Ai-NET compatible head unit is not connected, go to
Step 6.
5
Rotate the [Rotary encoder] to select “Standalone,”
and then press the [Rotary encoder].
• When a head unit without the MX Plus linking function is connected,
this should be set as “Standalone,” even if it is an Ai-NET compatible
head unit.
6
Press [ ] once or twice to go back to the screen
for Step 3.
7
Rotate the [Rotary encoder] to select “Level
Adjustment,” and then press the [Rotary encoder].
8
Select the source for each external input by rotating
the [Rotary encoder], and press the [Rotary
encoder].
01GB00PXAH800.book Page 45 Tuesday, February 8, 2011 9:04 PM