Filter
Top Products
Dynex 40" LED TV
15
DX-40D510NA15
www.dynexproducts.com
Component video (better)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the VIDEO/Y, P
B
, and P
R
video jacks on the back of your TV and the
component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio out jacks on
the cable or satellite TV box.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or
to highlight Comp/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The VIDEO/Y, P
B
, and P
R
video jacks (used to connect a
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect an AV device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
Audio cable
Cable or
satellite box
Component
video cable
Back of TV
Component
video cable
connectors
Audio cable
connector
Analog
audio jacks
Component
video jacks
On your TV