Filter
Top Products
Dynex 40" LED TV
21
DX-40D510NA15
www.dynexproducts.com
Composite video (good)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the AV
OUT jacks on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
or
to select COMP/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the
green VIDEO/Y jack.
Notes
•The VIDEO/Y, P
B
, and P
R
video jacks (used to connect a
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
AV cable (composite video)
Back of TV
AV
(composite
video) cable
connector
AV
(composite
video) jack
Audio cable
connectors
Audio jacks
DVD or Blu-ray player
On your TV