42
Dynex 40" LED TVDX-40D510NA15
www.dynexproducts.com
Customizing slideshow settings
You can customize the slideshow settings by selecting
Repeat, Shuffle, Speed, and Transition settings.
1 Switch to USB mode (see “Switching to USB mode”
on page 39).
2 Press MENU. The USB menu opens.
3 Press
to access the menu. Photos is highlighted.
4 Press ENTER to access the menu. The photos menu
opens.
5 Press
or
to highlight Settings, then press
ENTER. The photos settings menu opens.
6 Press
or
to highlight an option, then press
or
to select a setting. You can select:
• Repeat—To repeat the slideshow when it reaches
the end. You can select On or Off.
• Shuffle—To display the photos in random order.
You can select On or Off.
• Speed—To set the amount of time a photo is
displayed before the next photo is shown. You can
select 4 sec, 6 sec, or 8 sec.
• Transition—To select the way photos transition
when moving to the next file in the slideshow. You
can select:
• None—For no transition effect.
• Fade to Black—To fade the screen to black
between photos.
• Vertical Wipe—To wipe the screen from top to
bottom between photos.
• Horizontal Wipe—To wipe the screen from left
to right between photos.
• Random—To randomly select a transition
effect.
7 Press EXIT to close the menu.