Filter
Top Products
Dynex 40" LED TV
59
DX-40D510NA15
www.dynexproducts.com
Troubleshooting
Restoring settings to default
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Settings, then press
. The
Settings menu opens.
3 Press
or
to highlight Reset to Default, then
press ENTER. A confirmation box opens.
4 Press
or
to select Ye s (to reset all settings to
factory default), or No (to not reset). If you select Ye s,
your TV turns off, then turns on again. The SETUP
Wizard opens.
5 Go through the TV SETUP wizard. For more
information, see “Turning on your TV for the first
time” on page 34.
Viewing system information
You may need to view system information during
troubleshooting.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Settings, then press
or
ENTER. The Settings menu opens.
3 Press
or
to highlight System Info, then press
ENTER. Information about the TV software version is
displayed.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.
Caution
When you restore default settings, all the
settings you have customized are reset.