Filter
Top Products
44
Dynex 40" LED TVDX-40D510NA15
www.dynexproducts.com
• Aspect Ratio—Adjusts how the picture fills the
screen.
• Noise Reduction—Selects the noise reduction
mode to reduce picture noise (snow). You can
select Low, Middle, High, or Off.
• Overscan—When on, text and images extend
past the screen edges to hide edge artifacts.
You can select On or Off.
• Adaptive Contrast—Automatically adjusts
picture detail and brightness. You can select
On or Off.
• DCR (Dynamic Backlight)—Enhances the
contrast ratio between light and dark areas of
the picture. You can select Off, Low, or High.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
or
to adjust the option, or press
or
to
select a setting.
5 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Automatically adjusting the aspect ratio
Auto Zoom automatically changes how the picture
looks on the screen (aspect ratio) based on the TV
program you are viewing.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Channels, then press
or
ENTER. The Channels menu opens.
3 Press
or
to highlight Auto Zoom.
4 Press
or
to select On (automatically adjusts the
aspect ratio) or Off (does not automatically adjust
the aspect ratio).
5 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Setting the power on picture mode
You can set the picture mode your TV uses when you
turn it on.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Settings, then press
or
ENTER. The Settings menu opens.
3 Press
or
to highlight Power on in Vivid Mode.
4 Press
or
to select On (when you turn on your TV,
it will be in Vivid picture mode) or Off (when you
turn on your TV, it will be in the picture mode it was
in before you turned it off), then press ENTER.
5 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Aspect ratio option Example
Normal:
Original aspect ratio is preserved. Black
bars are present if content is not
widescreen (16:9).
Zoom:
Expands the image to fill the screen. The
top and bottom of the image may be
cropped.
Wide:
Use this option to view content recorded
in a 16:9 (wide-screen) aspect ratio.
Cinema:
Stretches the image at the edges, but
keeps a clear image in the center.
Auto:
The picture display is adjusted to the
correct aspect ratio automatically (TV
mode only). This setting is only active
when Auto Zoom in the Channels
menu is set to On.
Note
You can also press ASPECT to select the
aspect ratio.