Filter
Top Products
ķ
28
TIMER Menu
Timer and Video Recorder
In the Timer menu, it is possible to programme the SAT receiver
so that it automatically switches on and off on a certain pro-
gramme position at certain times for recording with a video
recorder which is programmed with the same times. It is possi-
ble to switch on and off four different programmes at times and
dates of your choice.
Calling Up the Menu
Press the
.
button on the remote control handset to open
the Timer menu. If there is no Timer programme stored in
memory yet, the display indicates:
While in the Timer menu, the indication "TIMER" is visible in
the top right corner of the display.
Press the
.
buton again to exit the Timer menu.
Timer Programming
Selecting/checking Timer positions
With the
xc
buttons on the remote contro handset, you
can select one of the four Timer positions.
The display indicates the number of the selected Timer posi-
tion, e.g., for Timer 3:
Timer programming is very easy. While viewing a TV pro-
gramme, you can programme a Timer position for a different
TV programme without interrupting the current one. A run-
ning VCR recording is not disturbed.
TIMER
opü +
I
__ __
PROGRAMX
STEREO
SIGNAL IIIIIIIIIIIII
TIMER
o pü+
I
__ __
PROGRAMX
STEREO
SIGNAL IIIIIIIIIIIII
Entering a programme
Enter the number of the desired programme directly with the
numeric buttons on the remote control handset, for example,
182.
The display indicates:
If you wish to preprogramme a radio recording, the receiver
must be switched from TV to radio with the
¢
RADIO
button or
the
0
button on the remote control handset before entering
the programme position number.
Press the
]
button to go to the date entry position.
Entering the date
Enter the desired date, for example, 31.05.95, with the nume-
ric buttons on the remote control handset.
The display indicates:
Press the
]
button to go to the start time entry position.
Entering the start time
Enter the start time directly with the numeric buttons on the
remote control handset, for example, start time 20:14 hours.
The display indicates:
Observe the change of the date when entering a start time
after 0 hours.
Press the
]
button to go to the stop time entry position.
Entering the stop time
Enter the stop time directly with the numeric buttons on the
remote control handset, for example, stop time 21:46 hours.
The display indicates:
Press the
O
button to store the entries into memory and go
to the next Timer position. Press the
.
button to return to
the TV programme.
TIMER
opü +
I99 OFF21
:
46
STEREO
SIGNAL IIIIIIIIIIIII
TIMER
opü +
I99 ONX20
:
14
STEREO
SIGNAL IIIIIIIIIIIII
TIMER
opü +
I99 31
.
05
.
95
STEREO
SIGNAL IIIIIIIIIIIII
TIMER
opü +
I82 XXARDXXX
STEREO
SIGNAL IIIIIIIIIIIII