Filter
Top Products
Advanced Settings
27
2.Speaker Setup
Allows you to change the speaker configuration such as presence or not of subwoofer,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup.
Furthermore, this setting cannot be selected if headphones are connected or audio is
output from the speakers of the TV.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection,
and other speaker settings.
Setting Item Default Value Setting Details
Speaker
Impedance
6ohms
"4ohms": When any of the connected speakers have
or more impedance
Front Speakers
Type
Normal Select the type of front speaker connection.
"Normal": When front speakers are connected in a
normal manner
"Bi-Amp": When front speakers are bi-amp
connected
Height 1 Speakers
Type
Not Use Set the type of speakers connected to HEIGHT 1
speaker terminals.
Select from the following options according to the
type and layout of the connected speakers: "Not
Use", "Front High", "Top Front", "Top Middle", "Dolby
Enabled Speaker (Front)", "Dolby Enabled Speaker
(Surround)", or "Dolby Enabled Speaker (Back)".
r
If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to " Not Use".
r
"Dolby Enabled Speaker (Surround)" cannot be
set when "Surround" is set to "None".
r
"Dolby Enabled Speaker (Back)" cannot be set
when "Back" is set to "None" or "1ch".
Setting Item Default Value Setting Details
Height 2 Speakers
Type
Not Use Set the type of speakers connected to HEIGHT 2
speaker terminals.
Selectable options vary depending on the setting
for "Front Speakers Type". Select from the following
options according to the type and layout of the
connected speakers and the setting for "Front
Speakers Type".
If "Front Speakers Type" is set to "Normal": Select
"Not Use", "Top Rear", "Rear High", "Dolby Enabled
Speaker (Surround)", or "Dolby Enabled Speaker
(Back)".
If "Front Speakers Type" is set to "Bi-Amp": Select
"Not Use", "Front High", "Top Front", "Top Middle", or
"Dolby Enabled Speaker (Front)".
r
In the following cases, the setting will be set to
"Not Use":
– "Front Speakers Type" is set to "Normal" and
also "Height 1 Speakers Type" is set to "Not
Use".
– "Height 1 Speakers Type" is set to "Top
Middle", "Dolby Enabled Speaker (Surround)"
or "Dolby Enabled Speaker (Back)".
r
"Dolby Enabled Speaker (Surround)" cannot be
set when "Surround" is set to "None".
r
"Dolby Enabled Speaker (Back)" cannot be set
when "Back" is set to "None" or "1ch".
No Set presence of speaker terminal connection of
"Yes": When speakers are connected to ZONE 2
speaker terminals
"No": When speakers are not connected to ZONE 2
speaker terminals
r
If "Height 2 Speakers Type" is set to other than
"Not Use", this item will be set to "No".