Filter
Top Products
Advanced Settings
41
Setting Item Default Value Setting Details
Control Monitor MAIN Select the main room monitor or the separate
room monitor for which the CEC link function is
enabled when Zone function is used.
"MAIN": The CEC link function is enabled for
the monitor in the main room.
"ZONE2": The CEC link function is enabled for
r
"MAIN" cannot be selected when " Monitor
Out " is set to "SUB".
r
"ZONE2" can be selected only when
r
When "ZONE2" is selected in "Control
Monitor", the power consumption increases
even when the unit is on standby. However,
the increase in power consumption is kept
to a minimum by automatically entering the
HYBRID STANDBY mode, where only the
essential circuit is operating.
Setting Item Default Value Setting Details
HDMI Through Off You can display the video of an HDMI
connected player on the TV even if the unit is
in standby mode. This setting is effective only
for an input selector to which an HDMI jack is
assigned in "HDMI Input". It cannot be set to
any other input selector unless an HDMI jack is
assigned to it.
"Off": The setting is disabled. Video of device
connected to any jack will not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD", "PHONO": Video of the
device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the
HDMI IN jack assigned to the input selector that
was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the
HDMI IN jacks will be output to the TV.
"Auto (Eco)": Video of all the devices connected
to the HDMI IN jacks will be output to the TV.
If you select this setting when using a CEC-
compatible TV, you can reduce the power
consumption in standby mode.
r
In the following cases, the "Auto" and "Eco"
cannot be selected:
– "HDMI CEC (RIHD)" is set to "Off".
– "HDMI CEC (RIHD)" is set to "On" and
also "Control Monitor" is set to "Zone2".
r
When "HDMI Through" is enabled, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
r
When changing the setting, turn off and
then on again the power of all connected
components.