Filter
Top Products
Advanced Settings
46
8.Remote Controller Setup
Setting Item Default Value Setting Details
Remote ID 1 Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Onkyo components that are
installed in the same room. After changing
the ID on the main unit, change the ID on the
remote controller accordingly with the following
procedure.
1. While holding down RECEIVER, press
RECEIVER button the remote indicator lights.
2. With the number buttons, press one of 1, 2,
and 3. RECEIVER button flashes twice.
Remote Mode Setup – Input and register the remote controller code of
other devices.
r
For registration of the remote control code,
refer to "Operating Other Components with
the Remote Controller".
9.Lock Setup
Setting Item Default Value Setting Details
Setup Unlocked The Setup menu will be locked to protect the
settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.