Filter
Top Products
Operating Other Components with the Remote Controller
48
3.
With the number buttons, enter the 5-digit remote control
code within 30 seconds.
The registration is complete when the REMOTE
MODE button flashes twice. The REMOTE MODE
button flashes once slowly when registering the
remote control code fails. Try the registration again.
1110
DIMMER
D.TUN
123
456
789
0
+
10
Remapping the Colored Buttons
The colored button assignment on the AV receiver's remote
controller can be remapped to match that on the remote
controller of the component whose remote control code
you programmed to REMOTE MODE. However, you will not
selected.
1.
Hold down the REMOTE MODE button to map and A
(Red) simultaneously until the REMOTE MODE button
lights (about 3 seconds).
Remapping is possible only for codes included in the
categories of the Remote Control Code List (such as
DVD player and TV).
SEARCH
MOVIE/
TV
2.
Within 30 seconds, press the colored buttons from left to
right, in the order you want to remap.
For example, if the colored buttons on the remote
controller of the other component are yellow, green,
blue, and red from left to right, press the buttons on
the AV receiver's remote controller in that order.
The registration is complete when the REMOTE
MODE button flashes twice. The REMOTE MODE
button flashes once slowly when registering the
remote control code fails. Try the registration again.
Pressing any other button than a colored button
cancels the remap operation.
REPEAT RANDOM MODESEARCH
MOVIE/
TV
MUSIC
THX
GAME
Resetting the REMOTE MODE Buttons
You can reset the remote control code registered in the
REMOTE MODE button to its default status. This operation
can be executed on a single REMOTE MODE button.
1.
Press HOME for 3 or more seconds while holding down
the REMOTE MODE button you want to reset.
The REMOTE MODE button stays lit.
2.
Within 30 seconds, press the REMOTE MODE button
again.
Resetting is complete when the REMOTE MODE
button flashes twice.
To reset all the remote controller settings: While holding
down RECEIVER, press and hold down HOME until
the RECEIVER button lights (about 3 seconds). Press
RECEIVER again within 30 seconds. Reset is complete
when the RECEIVER button flashes twice.
TV Operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
TV
REMOTE MODE
/
INPUT SELECTOR
REMOTE MODE
VOL
INPUT
ALBUM
CH
DISC
GAME
TUNER
TV
/
CD
BD/DVD
P
CAUX
PHONO
STB
/DVRCBL
/SAT
MUTING
MODE
RECEIVER
TV
BLUETOOTH
USBNET
3
4
1
2
1
REMOTE MODE
2
, INPUT, VOL
/
3
MUTING
4
CH +/-
PLAYLISTPLAYLIST
SETUP RETURN
PREV CH
MENU
GUIDE
TOP MENU
ENTER
Q
8
9
5
7
6
5
GUIDE
6
/
/
/
, ENTER
7
SETUP
8
PREV CH
9
RETURN