Filter
Top Products
Black plate (48,1)
Introduction of DVD setup
adjustments
1
1 DVDsetup menu display
Shows the DVD setup menu names.
You can use this menu to change audio, subti-
tle, parental lock and other DVD settings.
1 Touch g.
Setup will be displayed instead of Menu.
2 Touch Setup.
The DVD setup function names are displayed.
3 Touch ESC to return to the playback dis-
play.
# To return to the previous display, touch
Back.
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1 Touch Subtitle Language on the DVD
setup menu.
A subtitle language menu is displayed.
2 Touch the desired language.
A subtitle language is set.
# If you have selected Others, referto When you
select Others onthis page.
Notes
! If the selected languageis not recorded on
the disc, the languagespecified on the disc is
displayed.
! You can alsoswitch the subtitle language by
touching Subtitle duringplayback. (Refer to
Changing the subtitlelanguage during play-
back (Multi-subtitle) on page25.)
! Even if you use Subtitleduring playback to
switch the subtitle language, this does not af-
fect the settings here.
When you select Others
When you select Others, a language code
input display is shown. Please see the follow-
ing section to input the four-digit code of the
desired language. Refer to Language code
chart for DVD on page 100.
1 Touch 0 to 9 to input the language
code.
# To cancel the inputted numbers, touchC.
2 Touch .
Setting the audio language
You can set the preferred audio language.
1 Touch Audio Language on the DVD
setup menu.
An audio language menu is displayed.
2 Touch the desired language.
The audio language is set.
# If you have selected Others, referto When you
select Others onthis page.
Notes
! If the selected languageis not recorded on
the disc, the languagespecified on the disc is
outputted.
<CRB2901-A
/
N>48
Setting up the DVD player
En
48
Section
14