Filter
Top Products
Black plate (52,1)
Adjusting initial settings
1
1 Functiondisplay
Shows the function names.
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Touch the source icon and then touch
Off to turn this unit off.
2 Touch the screen to display the touch
panel keys.
3 Touch AV Menu and then touch
Initial Menu to display the function names.
The function names are displayed and oper-
able ones are highlighted.
4 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch
Back.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 62.
Switching the auxiliary 1 setting
% Touch AUX1 on the initial menu to se-
lect desired setting.
! Video – auxiliary video device connected
with 4-pole mini plugcable (e.g., CD-
V150M)
! Audio – auxiliary device connected with
stereo mini plug cable
! iPod – an iPod withvideo capabilities con-
nected with CD-IU200V
! Off – Noauxiliary device is connected
Switching the auxiliary 2 setting
% Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
# To turn auxiliary 2 settingoff, touchAUX2
again.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
% Touch FM Step on the initial menu to
select the FM tuning step.
Touching FM Step will switch the FM tuning
step between 50 kHz and 100 kHz. The se-
lected FM tuning step will appear in the dis-
play.
# If seek tuning isperformed in 50 kHz steps,
stations may be tunedin imprecisely. Tunein the
stations with manualtuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1602 kHz allowable) to 10 kHz (530 kHz
to 1640 kHz allowable).
<
CRB2901-A
/
N>52
Initial Settings
En
52
Section
15