Filter
Top Products
Black plate (41,1)
Basic Operations
3
3
3
2
2
2
1
1
1
4
4
4
5
! You can use this unit to control an iPod by
using a cable (e.g., CD-IU50), which is sold
separately.
! If an iPod with video capabilities is con-
nected to this unit via interface cable (e.g.
CD-IU200V), which is sold separately, you
can enjoy the video contents of the iPod as
the iPod source. In this case, set the AUX1
to iPod. Refer to Switching the auxiliary set-
ting on page 52.
1 Sourceicon
Shows which source has been selected.
2 Repeatindicator
Shows when repeat range is set to
or .
3 Songnumber indicator
Up to 65535 can be displayed as the song
number.
4 Shuffleindicator
Shows when random play is set to Songs or
Albums.
5 Songinformation
Shows detailed information of currently
playing song.
1 Touch the source icon and then touch
iPod to select the iPod.
While connected to this unit, PIONEER, Acces-
sory Attached or
(check mark) is displayed
on the iPod.
# When the source iconis not displayed, you
can display it bytouching the screen.
# Touch Hide to hide the touchpanel keys.
# Before connecting thedock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
# Depending on themodel of iPod or the data
size in the iPod, theremay be a delay to startplay-
ing after connection.
# After the iPod has been connectedto this
unit, use touch panelkeys to select the iPod.
# When removing theiPod from thisunit, this
unit is turned off.
2 To skip back or forward to another
song, touch o or p.
# You can alsoskip back or forward to another
song/video by pressingc or d (TRACK).
3 To perform fast forward or reverse,
keep touching o or p.
When video is playing, if you keep touching
o or p for five seconds, the icon m or
n is highlighted. When this happens, fast
reverse/fast forward continues even if you re-
lease o or p. To resume playback at a de-
sired point, touch f.
# You can alsoperform fast reverse/fast forward
by pressing and holdingc or d (TRACK).
4 When playing a file with chapter, touch
o or p to select a chapter.
Notes
! Read the precautions for iPod in the following
section. Referto page 97.
! If an error messageor icon is displayed, refer
to Error messages onpage 89.
! Connect directly thedock connector cable to
the iPod so that thisunit works properly.
! When the ignitionswitch is set to ACC or ON,
the iPod’s battery is charged while theiPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turnedon or off.
! The iPod is turned offabout two minutes after
the ignition switchis set to OFF.
<CRB2901-A
/
N>41
Using iPod
En
41
Section
12
Using iPod