Filter
Top Products
Black plate (54,1)
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
! This function is initially set to Auto so that
this unit automatically adjusts the TV signal
setting.
! About your country TV signal, consult with
your nearest Pioneer dealer.
! Only when a Pioneer TV tuner (e.g. GEX-
P5750TV(P)) is connected to this unit, you
can operate this function.
% Touch TV Signal on the initial menu to
select an appropriate TV signal.
Touching TV Signal switches TV signal set-
tings in the following order:
Auto—PAL—NTSC—PAL-M—SECAM
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB100) is con-
nected to this unit.
1 Touch PIN Code Input on the initial
menu.
PIN code input display appears.
2 Touch 0 to 9 to input the PIN code of
your Bluetooth audio player.
# To cancel the inputted numbers, touchC.
3 After inputting PIN code (up to 16 di-
gits), touch Enter.
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to Low. Normally, leave the set-
ting at High to ensure quality sound.
! Only when the multi-channel processor
(DEQ-P7650/DEQ-P6600) is connected to
this unit, you can operate this function.
% Touch Digital ATT on the initial menu to
switch the digital attenuator setting.
Touch Digital ATT repeatedly until the desired
setting appears in the display.
! High – High qualitysound
! Low – Minimize distortionsound
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
! Only when the multi-channel processor
(DEQ-P7650/DEQ-P6600) is connected to
this unit, you can operate this function.
Please see the following section for Auto TA
and EQ operation. Refer to Auto TA and EQ
(auto-time alignment and auto-equalizing) on
page 84
<CRB2901-A
/
N>54
Initial Settings
En
54
Section
15