Filter
Top Products
Black plate (20,1)
# When P1 to P6are not displayed, you can dis-
play them by touchingList.
# You can alsouse a and b to recall radiosta-
tion frequencies assignedto preset tuning keys
P1 to P6.
3 Touch ESC to return to the ordinary dis-
play.
Introduction of advanced
tuner operation
1 Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the frequency
display.
# To return to the previous display, touch
Back.
Storing the strongest
broadcast frequencies
BSM (best stations memory) automatically
stores the six strongest broadcast frequencies
in the order of their signal strength.
! Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using P1 to P6.
% Touch BSM on the function menu to
turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning keys P1 to P6 in
order of their signal strength. When finished,
BSM stops flashing.
# To cancel the storage process,touch BSM
again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
% Touch Local on the function menu to
set the sensitivity.
Touch Local repeatedly until the desired level
of sensitivity appears in the display.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Off—Level1—Level2—Level3—Level4
AM: Off—Level1—Level2
Larger setting number is higher level. The
highest level setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
<CRB2901-A
/
N>20
Radio
En
20
Section
05