Filter
Top Products
Black plate (69,1)
! This unit does not have the name edit func-
tion of a Phone Book entry.
% Touch the source icon and then touch
TEL to select the telephone.
Note
The equalizer curve for the phonesource is fixed.
When selecting thephone source, you cannot
perform the operation in the followingsection.
Refer to Usingthe equalizer on page 45.
When the multi-channel processor is connected
to this unit, youcan operate the equalizer func-
tion even when selectingthe phone source. Refer
to Recalling equalizer curves on page 83.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
the next page.
# Your phone shouldnow be temporarily con-
nected. However, to make bestuse of the technol-
ogy, we recommend youregister the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering a connected cellular phone
on the next page.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller’s voice volume and ringvolume may
vary depending on the type ofcellular phone.
# If the difference betweenthe ring volume and
caller’s voice volume is big,overall volume level
may become unstable.
# Before disconnecting thecellular phone from
this unit, make sureto adjust the volume to a
proper level. If the volumeis muted (zero level) on
your cellular phone,the volume level of your cel-
lular phone remainsmuted even after the cellular
phone is disconnected.
Making a phone call
Voice recognition
1 Touch to turn the voice recognition
function on.
Voice dial icon appears on the information bar.
Voice recognition function is now ready.
# To cancel the voice recognitionfunction,
touch
again.
2 Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
1 When a call comes in, touch .
# You can alsoperform the same operation by
pressing c (TRACK).
# If private mode isselected on the cellular
phone, hands-free phoningmay not be per-
formed.
2 To end the call, touch .
# You can alsoperform the same operation by
pressing d (TRACK).
Rejecting an incoming call
% When a call comes in, touch .
The call is rejected.
# You can alsoperform the same operation by
pressing d (TRACK).
Answering a call waiting
1 Touch to answer a call waiting.
# You can alsoperform the same operation by
pressing c (TRACK).
2 Touch to end all calls.
# The caller you have been talkingto is now on
hold. To end the call, bothyou and your caller
need to hang upthe phone.
# While your callers holdthe line, touching
switches between callers.
<CRB2901-A
/
N>69
Available accessories
En
69
Section
19
Available accessories