Filter
Top Products
03
34
En
Connecting USB
storage devices
Caution
• Be sure to turn this unit’s power off (to the standby
mode) before connecting or disconnecting USB
storage devices.
• When using an external HDD (hard disk drive) as the
external storage device, be sure to turn on the HDD’s
power before turning on this unit’s power.
• If the USB storage device is write-protected, be sure
to disable the write-protection.
• When connecting the USB cable, hold onto the plug,
set the plug in the proper direction for the port, then
insert it horizontally.
• Placing excessive loads on the plug may result in
faulty contact, making it impossible to read the data
on the USB storage device.
• Do not unplug the power cord when a USB storage
device is connected and this unit’s power is turned
on.
Note
• It is not possible to use the two USB ports
simultaneously.
• Devices may not work if connected to the USB port via
a memory card reader or USB hub.
• Use a USB cable with a length of two meters or less.
Connecting the power
cord
Connect the power cord after all the connections between
the devices have been completed.
Rear panel
Hard disk
drive, etc.
USB cable
(commercially
available)
USB
memory,
etc.
EXT TERMINAL
AC IN
Rear panel
Uninterruptible
power supply, etc.
Power cable
(included)