Filter
Top Products
47
En
06
English
Other settings (Options)
1. This cannot be set when NTP is set to Enable (page 49).
2. • The LCD button always operates (remains unlocked), regardless of the Front Key setting.
• To temporarily unlock operation of the buttons on the main unit’s front panel, press the LCD, ENTER and RETURN buttons on the front
panel simultaneously for over one second. This only enables operation temporarily, and does not change the Front Key setting.
3. This cannot be changed during playback.
4. The 9-pin and 15-pin connectors cannot be used simultaneously for RS-232C signal transfer.
5. The following settings are restored to the defaults set upon purchase.
• All Video Settings items
• All Audio Settings items
• The following Network Settings items
– Network Connection
– Type
– Wakeup On LAN
– NTP
• All Initial Settings items aside from Clock Setting.
Setting item Settings Description
Clock Setting
1
Year/Month/Day/
Hour/Minutes/
Seconds
Sets the date and time of this unit’s internal clock.
Front Key
Enable Unlocks operation of the buttons on the main unit’s front panel.
Disable
Locks operation of the buttons on the main unit’s front panel.
2
File Play Mode
3
Single The stop mode is set after one file is played to the end.
All
When playback of one of the video files in the video folder on the SD memory card is
finished, the next file in the sorted order is played.
Repeat Mode
3
Off Playback is not repeated.
On
The file(s) is (are) played repeatedly. (Which files are played depends on the File Play Mode
setting.)
Serial Port
9Pin
Select this when connecting a computer to this unit’s RS-232C terminal using a 9-pin cross
cable (commercially available).
15Pin
Select this when connecting a computer to this unit’s EXT TERMINAL connector.
4
Baud Rate
2400 Sets the RS-232C terminal’s transfer rate to 2 400 bps.
4800 Sets the RS-232C terminal’s transfer rate to 4 800 bps.
9600 Sets the RS-232C terminal’s transfer rate to 9 600 bps.
19200 Sets the RS-232C terminal’s transfer rate to 19 200 bps.
Extend Terminal
Standard Sets the EXTEND TERMINAL button function to the preset standard.
User Sets the EXTEND TERMINAL button function to the desired value (page 67).
Auto Power Off
Disable
The power does not turn off automatically even if no operation is performed for the specified
time.
Enable
The power turns off automatically (is set to standby) if no button is operated or there is no
command control or access from the LAN for over 2 hours when no SD memory card is
loaded.
Initialize
3
No/Yes
When Yes is selected, this unit’s settings are restored to the defaults set upon purchase.
5
Turn the power off then back on.