Filter
Top Products
37
En
05
English
Chapter 5
Basic Operation
Loading the SD
memory card
Caution
• If the SD memory card is inserted or removed while
this unit’s power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card’s information.
1 Set the groove in the door lock key on the main
unit’s front panel so that it is vertical.
The door is unlocked and can now open.
2 Open the door and load the SD memory card.
Hold the SD memory card with the front facing upwards
and insert it slowly all the way into the slot until it stops.
3 Close the door and set the groove in the door lock
key so that it is horizontal.
The door is locked and no longer opens.
4 Turn on the power.
Press the STANDBY/ON button.
Playback is possible once the POWER ON message
appears. About one minute is required before playback
becomes possible. Take this startup time into account
when controlling the power externally.
Note
• See page 22 for the folder structure of SD memory
cards used on this unit.
Removing the SD memory
card from this unit
Caution
• Do not pull the SD memory card out or unplug this
unit’s power cord while the CARD ACCESS indicator
is flashing. Doing so could destroy the data recorded
on the card.
1 Turn off the power.
Press the STANDBY/ON button. After the POWER OFF
message appears, the display turns off and the
STANDBY/ON button’s indicator switches from green
to orange.
2 Set the groove in the door lock key so that it is
vertical.
The door is unlocked and can now open.
3 Open the door, push the SD memory card in so
that it pops out a little, then pull it out horizontally.
• Do not forcibly insert or pull out the SD memory card.
Doing so could damage the SD memory card or lead
to malfunction of this unit.
• Depending on the shape of the SD memory card, the
card may not pop out when it is pushed in. If this
happens, try pushing the card in several times until it
pops out. Pulling on the card forcibly when it is
inserted in the SD memory card slot may cause
damage.
• Do not insert any objects other than SD memory
cards into the SD memory card insertion slot.
Inserting coins or other metal objects could damage
the internal circuitry and lead to malfunction.
• If the SD memory card is inserted or removed while
this unit’s power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card’s information.
SEARCH
FRM
/TIME
REPEAT MEMORY RECALL
DISPLAY
PLAY
MODE
NAVI-
GATOR
SETUP RETURN
OUTPUT
RESOLUTION
+
-
STANDBY/ON
Unlocked
Groove is
vertical
Locked
Groove is
horizontal