A SERVICE OF

logo

Open as PDF
next previous
DISPlay Subsystem
AM700 Audio Measurement Set Programmer Manual
3–61
DISPlay:WINDow:TRAce[:X]:AXIS:UNIT <unit_type>
Usage: Used to set the units of the traces’ x-axes.
Example: DISP:WIND:TRAC:X:AXIS:UNIT khz or
DISP:WIND:TRAC:AXIS:UNIT khz sets the x-axes units to kilohertz.
Query: DISP:WIND:TRAC:X:AXIS:UNIT? or DISP:WIND:TRAC:AXIS:UNIT?
returns the setting of the x-axis units.
*RST: Sets x-axis units to Hz.
DISPlay:WINDow[5|60]:TRACe[1–16][:X]:AXIS:UNIT <unit_type>
Usage: Used to set the x-axis units of the specified trace in the anayzer real-time
measurement traces (WIND5) or the generator (WIND60).
Suffixes: The suffixes for real-time analyzer TRACe are counted across the rows
(through one channel, and then the next). The indices are as follows:
1 Ch 1 Frequency
2 Ch 1 Level
3 Ch 1 THD
4 Ch 1 THD+N
5 Ch 1Wow&Flutter
6 Ch 1 IMD
7 Ch 2 Frequency
8 Ch 2 Level
8 Ch 2 THD
10 Ch 2 THD+N
11 Ch 2 Wow&Flutter
12 Ch 2 IMD
13 Level Diff [1 to 2]
14 Phase Diff [1 to 2]
15 Crosstalk
16 Separation