Filter
Top Products
Black plate (70,1)
# You can alsoperform the same operation by
pressing d (TRACK).
Rejecting call waiting
% Touch to reject a call waiting.
# You can alsoperform the same operation by
pressing d (TRACK).
Introduction to advanced
operations
1 Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the telephone
standby display.
# To return to the previous display, touchBack.
Connecting a cellular phone
Searching for available cellular phones
1 Touch Phone Connect on the function
menu.
2 Touch Search to search for available cel-
lular phones.
While searching, Searching flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name Not Found (if names cannot be ob-
tained) is displayed.
# If this unit fails to findany available cellular
phones, Not Foundis displayed.
# You can displaythe BD address by touching
BD ADDR. To return to the device name,touch
Phone Name.
3 Touch the device name you want to
connect.
While connecting, Connecting flashes. To
complete the connection, check the device
name (Pioneer BTunit) and enter the link
code on your cellular phone.
# Up to five peripheralcellular phones are dis-
played.
# PIN code is setto 0000 as the default. You
can change this codein the initial setting. Refer
to Entering PIN codefor Bluetooth wireless con-
nection on page 54.
Using a cellular phone to initiate a
connection
1 Touch Phone Connect on the function
menu.
2 Touch Connection Open.
Connection Waiting flashes and the unit is
now on standby for connection from a cellular
phone.
3 Use cellular phone to connect to this
unit.
# To cancel this function, touch
Connection Open again.
# PIN code is setto 0000 as the default. You
can change this codein the initial setting. Refer
to Entering PIN codefor Bluetooth wireless con-
nection on page 54.
Disconnecting a cellular phone
1 Touch Phone Connect on the function
menu.
2 Touch Disconnect to disconnect the cur-
rently connected cellular phone from this
unit.
After disconnection is completed,
No Connection is displayed.
Registering a connected
cellular phone
1 Touch Phone Register on the function
menu.
Registration assignments for user phone 1, 2
and 3 appear on the display.
2 Touch and hold one of the registration
assignments to register the currently con-
nected phone.
If the registration is succeeded, the device
name of the connected phone is displayed in
the selected assignment.
<
CRB2901-A
/
N>70
Available accessories
En
70
Section
19