Filter
Top Products
User’s Manual 4-29
Operating Basics
n TOSHIBA Disc Creator cannot record in packet format.
n You might not be able to use the “Disc Backup” function of TOSHIBA Disc
Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW disc that was made with other software on a
different optical media recorder.
n If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R (Double
Layer) disc that you have already recorded to, you might not be able to read
the added data under some circumstances. For example, it cannot be read
under 16-bit operating systems, such as Windows 98SE and Windows Me,
while in Windows NT4 you will need Service Pack 6 or later, and in Windows
2000, you will need Service Pack 2. In addition to this, some DVD-ROM and
DVD-ROM/CD-R/RW drives cannot read this added data regardless of the
operating system.
n TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to
achieve this you should use Windows Explorer or another similar utility.
n When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer) or DVD+RW media - if this is not the case then the source disc might
not be backed up correctly.
n When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW disc, be sure to use the same type of disc.
n You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
Data Verification
To verify that data has been written or rewritten correctly to a data CD/DVD you
should follow the steps below before you begin the write/rewrite process:
1. Display the setting dialog box by one of the following two steps:
n Click the Recording settings button ( ) for writing on the main toolbar
in the Data Disc mode.
n Select Settings for Each Mode Data CD/DVD in the Settings menu.
2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator information.