Filter
Top Products
User’s Manual4-6
Operating Basics
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point
to TOSHIBA Fingerprint Utility and click it. Or double click the icon in the
Task Bar.
2. The Enter Windows Password screen is displayed. Enter a password into the
Enter Windows Password field. Click Next.
3. The Enroll screen is displayed. Click the non-enrolled finger icon above the
finger and click Next.
4. The note for enrollment operation screen is displayed. Confirm the message
and click Next.
5. The Scanning Practice screen is displayed. You can practice swiping your
finger. When you have finished practicing swiping your finger, click Next.
6. The last step for enrollment screen is displayed. Swipe three times with the
same finger. If scan of fingerprint succeeds, “ Enrollment succeed. Do
you want to save this template?” will show, click “OK”.
7. In case of finger injury or authentication failure, it is recommended that
another fingerprint also be enrolled. The following message will be displayed:
[Strongly recommended to do one more enroll.] Click OK and
repeat steps 3, 4, 5 and 6 with another finger.
n The ngerprint authentication uses the same Windows logon ID and
password. If the Windows logon password has not been setup, please do
so before registration.
n This sensor has memory space for at least 20 ngerprint patterns. You
might be able to register more ngerprint patterns depending on the
sensor memory usage.
How to delete the fingerprint data
Saved ngerprint data is stored in the Non-volatile memory inside the ngerprint
sensor. If you hand over the PC to others, or dispose of it, the following operations
are recommended.
1. Click Start, point to All Programs, point to TOSHIBA, point to Utilities, point
to TOSHIBA Fingerprint Utility and click it. .
2. The TOSHIBA Fingerprint Utility main menu is displayed.
3. “Are you sure you want to delete this template?” will
be displayed on screen, click OK button. If you want to delete the other
fingerprints, repeat step 2, 3.
n To delete for all user’s fingerprints:
1. Click “Run as administrator” in lower left. If UAC setting for Windows
is off, this button will not appear.