Filter
Top Products
User’s Manual4-44
Operating Basics
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer’s LAN jack and pull out the
connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of dust and
use care with liquids around the computer.
n Be careful not to spill liquids into the computer. If the computer does get wet,
turn the power off immediately and let the computer dry completely before you
turn it on again.
n Clean the computer using a slightly damp (with water) cloth. You can use
glass cleaner on the display. Spray a small amount of cleaner on a soft, clean
cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any part of
it. Never use harsh or caustic chemical products to clean the computer.
n Remove the dust from the cooling vents on the Left side of the computer
regularly with a vacuum cleaner. Refer to Chapter 2, The Grand Tour, Left
side.
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
n Before moving the computer, it recommends changing the function of
TOSHIBA HDD Protection. Refer to the section, Using the Hard Disk Drive
(HDD) Protection, in this chapter.
n Make sure all disk activity has ended before moving the computer. Check the
HDD indicator on the computer.
n If a CD/DVD is in the drive, remove it. Also make sure the disc tray is securely
closed.