Filter
Top Products
User’s Manual 4-7
Operating Basics
2. User Account Control window is displayed when you click a Run as
administrator. Select Allow on User Account Control window.
3. Swipe your enrolled finger.
4. Click Fingerprint control.
5. Click Delete All button in the lower right.
6. “Are you sure you want to delete all fingerprints?”
will be displayed on screen, click OK button.
n If the ngerprint authentication fails, please logon using the Windows
logon password.
n Please logon using the Windows logon password if the ngerprint
authentication failed for ve times. To logon using the Windows logon
password, enter the Windows logon password at the [Welcome] screen as
normal.
n A warning message will be displayed when authentication is abnormal or
authentication is not successful within a xed duration.
Windows logon via fingerprint authentication
In place of the usual Windows logon by ID and password, ngerprint
authentication also allows logon to Windows.
This is useful especially when many users are using the PCs, as user selection
can be skipped.
Fingerprint authentication procedure
1. Start up the computer.
2. The Logon Authorization screen is displayed. Choose any of the enrolled
fingers and swipe the fingerprint on the sensor. If authentication is successful,
the user will be logged on to Windows.
Fingerprint system boot authentication
General
The ngerprint authentication system can be used to replace the keyboard based
User Password authentication system when booting up
If you do not want to use the ngerprint authentication system for password
authentication when booting up, but prefer to use the keyboard-based system
instead, press the ESC key or click Switch User button when the Fingerprint
System Authentication screen is displayed. This will switch the password input
screen to the keyboard-based one.