Filter
Top Products
User’s Manual4-42
Operating Basics
Product Support
The latest information regarding Operating System support, Language Support
or available upgrades can be found on our web site http://www.toshiba-europe.
com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the
United States.
Wireless communication switch
You can enable or disable the Wireless LAN function, with the on/off switch. No
transmissions are sent or received when the switch is off. Slid the Switch to turn it
on and turn it off.
Set the switch to off in airplanes and hospitals. Check the indicator. It will stop
glowing when the wireless communication function is off.
Wireless activity LED
The wireless activity LED indicates the status of the wireless communication
functions.
Indicator status Indication
LED off Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction.
LED glows Wireless communication switch is on. Wireless
LAN is turned on by an application.
If you used the Task Bar to disable Wireless LAN, you will need to restart the
computer to re-enable it. Alternatively, you can also follow this procedure:
1. In the Control Panel, click System and Maintenance.
2. Click the Device Manager. The Device Manager window opens. Click Network
adaptors.
3. Select your preferred Network adaptor, then click the Enable button in the tool
bar.
LAN
The computer has built-in support for Fast Ethernet LAN (10 megabits per second,
10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
This section describes how to connect disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is enabled.