Yamaha CDR-HD1300 Car Stereo System User Manual


 
E-20
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
Recording from the Digital Components
You can make recordings from the component such as a cable TV tuner and a DVD player digitally connected to this unit.
Note
Recording onto the HDD is made in the unit called disc. The maximum length of one disc on the HDD is 99 minutes 59 seconds. If the
recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.
NATURAL SOUND HDD
/
CD RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDRHDD
MIN MAX
LEVELPHONES
POWER
65 5
4832
1
OPEN/CLOSE
COPY REC
TEXT/TIME
TRACK NO.
WRITE
MODE MENU
CLEAR
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQR
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM NTRO
ENTER
COMPLETE
A.M.Q.R.
FINALIZE
INPUT
TIMER REC
ERASE
4
JKL
5
MNO
6
PQR
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM
GROUP SKIP
INTRO
HDD CDR
5
4
5
3
2
6
8
6
1. Turn on the power of this unit by pressing POWER on
the front panel.
The message WELCOME TO YAMAHA HDD/CD SYS-
TEM appears on the display. After the message is displayed,
this unit is ready for operation.
2. Press HDD to select the HDD.
3. Press REC.
The HDD mark flashes, and the disc and track numbers to be
recorded are indicated on the display. Recording has not been
started yet at this stage. (Recording pause mode)
4. Select the input source to be recorded.
Press INPUT repeatedly until the OPTICAL or COAXIAL
indicator lights up.
5. Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
to suit your needs.
Play the loudest passage (highest sound level) of the source to
be recorded.
By pressing MENU, the display changes for the level
adjustment.
Rotate the MULTI JOG knob (press +/ on the remote control)
to adjust the recording level. When the adjustment is com-
pleted, press MULTI JOG knob (ENTER on the remote
control) to confirm the adjusted recording level.
Note
Adjust the recording level so that the red part on the peak
level meter does not light at the loudest sound levels.
See Adjusting the Recording Level on page 24 for details.
6. Start recording.
Press w/d (w or d on the remote control) to start recording.
7. Start playing the source.
Press w/d (d on the remote control) to stop recording
temporarily. The HDD mark flashes and the track number is
advanced to the next.
Press w/d (w or d on the remote control) to resume recording.
8. Press a to stop recording.
The first track number of the disc at which recording has been
stopped is indicated on the display.
IMPORTANT
Never turn off the power of this unit during recording.
Recording may not be correctly made, or the data on the HDD
may be damaged.
During recording, make sure that this unit is not subjected to
shock or vibration as the HDD may be damaged.
Disc number to be recorded Track number to be recorded
Dsc002 1 000
REC
GROUP
L
R
dB 30 10 6 20
SYNC
Dsc002 1 001
REC
L
R
dB 30 10 6 20
SYNC
Dsc002 1
GROUP
L
R
dB 30 10 6 20
G
103_HD1300(E)14-28 02.6.24, 6:51 PM20