Filter
Top Products
E-88
SYSTEM UTILITY
■ To set auto play (Auto Play)
You can set the auto play function which automatically starts
playback when the power of this unit is turned on.
1. Press MENU while this unit is in the stop mode.
The display changes for the menu item selection.
2. Select “Sys. Utility” by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control).
The display changes for the system utility item selection.
4. Select “Auto Play” by rotating the MULTI JOG knob
(pressing +/– on the remote control).
5. The current setting is indicated on the display if the
MULTI JOG knob (ENTER on the remote control) is
pressed.
Switch “Auto Play On” and “Auto Play Off” by rotating the
MULTI JOG knob (pressing +/– on the remote control).
Note
• Initial setting is “Auto Play Off”.
6. Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The auto play function is set to on or off.
If the auto play function is set to on, the setting will be applied
when the power of this unit is turned on the next time.
• This unit plays data on the drive that had been last selected
when the power of this unit was last turned off.
• This unit plays in the playback mode (such as random play)
that had been last set when the power of this unit was last
turned off.
Note
• The setting for the timer recording takes precedence over the
setting for the auto play function. If the timer recording is set, this
unit starts recording when the power of this unit is turned on the
next time even when “Auto Play On” is selected. See page 22 for
the timer recording.
■ To update the firmware version
(Firm. Update)
This menu is prepared for the expansion of the functions in the
future.
Auto Play
L
R
dB –30 –10 –6 –20
Auto Play Off
L
R
dB –30 –10 –6 –20
110_HD1300(E)84-94 02.6.24, 6:52 PM88