Yamaha CDR-HD1300 Car Stereo System User Manual


 
E-65
English
COPYING AND RECORDING ONTO A CD-R OR CD-RW DISC
COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC
Copying menu setting
You can make detailed settings on the menu for your copying.
Follow the steps described below for menu setting.
1. Press MENU while this unit is in the copy standby
mode.
You can start setting the copying menu.
2. Select the menu item to be set by rotating the MULTI
JOG knob (pressing +/ on the remote control).
The copying menu contains 3 items as follows:
Copy Method (setting the copying method)
Copy Level (setting the copying level)
Copy Speed (setting the copying speed)
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the menu item to be adjusted.
4. Adjust the parameter for each item by rotating the
MULTI JOG knob (pressing +/ on the remote
control).
See the further steps for detailed instructions on parameter
adjustment for each item.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6. Press MENU to close the menu.
This unit returns to the copy standby mode.
ER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
MULTI JOG MENU
OPEN/CLOSE
COPY REC
TEXT/TIME
TRACK NO.
WRITE
MODE MENU
CLEAR
1
ABC
2
DEF
3
GHI
ENTER
COMPLETE
A.M.Q.R.
FINALIZE
INPUT
TIMER REC
ERASE
ENTER
+,
MENU
Copy Method
Setting of the copying method. Copying may fail if the setting for
Copy Method is not correctly made.
Initial setting: Analog Copy
Analog Copy
This method always makes analog copies.
Digital Move
The data is moved from the HDD to the CD. Therefore, the track or
group data will be deleted from the HDD after they have been
moved to the CD-R or CD-RW disc by this method.
Digital Copy
This method always makes digital copies. Copying is not possible if
the tracks are copy protected by the SCMS standard (see page 5).
Auto Dig/Anlg
Digital and analog copying are automatically switched depending
on the track. If digital copying is prohibited by the SCMS standard
(see page 5), an analog copy is made. For those tracks that can be
digitally copied, a digital copy is made.
Notes
In analog copying, the data may be copied at a lower sound level.
The settings is stored in the memory and applied to future
copying.
Copy Method
REC
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
107_HD1300(E)60-71 02.6.24, 6:51 PM65